Publications

These are my research publications.......

 

PEER REVIEWED JOURNALS AND BOOK SERIES (FROM PEER REVIEWED CONFERENCES)

 

44. Ismael Díaz, Manuel Rodríguez and Emilio J. González 2017). "Selection of a minimum toxicity and high performance ionic liquid mixture for the separation of aromatic-aliphatic mixtures by extractive distillation."  Computer-Aided Chemical Engineering, Volume XX, Pages: XXX-XXX, Elsevier.  (27th EUROPEAN SYMPOSIUM ON COMPUTER AIDED PROCESS ENGINEERING, ESCAPE 27) 


43. 
Manuel Rodriguez, Ismael Díaz, Julia Bermejo, Ricardo Sanz , Carlos Hernández (2017). "Integral Management of Process Plants Systems through their Lifecycle using a Model-Based Engineering Approach". Computer-Aided Chemical Engineering, Volume XX, Pages: XXX-XXX, Elsevier.  (27th EUROPEAN SYMPOSIUM ON COMPUTER AIDED PROCESS ENGINEERING, ESCAPE 27) 


42. M. Rodriguez, Ping Zhou Li, I. Díaz (2017). A Control Strategy for Extractive and Reactive Dividing Wall Columns. Chemical Engineering & Processing: Process Intensification, vol 113, pp 14-19. 
http://dx.doi.org/10.1016/j.cep.2016.10.004

 

41. I. Díaz, J. Palomar, M. Rodriguez, J. de Riva, V. Ferro, E.J. Gonzalez (2016). Ionic Liquids as Entrainers for the Separation of Aromatic-Aliphatic Hydrocarbon Mixtures by Extractive Distillation. Chemical Engineering Research and Design, vol 115, pp 382-393. http://dx.doi.org/10.1016/j.cherd.2016.07.012

  

40. M. Rodríguez, I. Díaz (2016). A systematic and integral hazards analysis technique applied to the process industry. Journal of Loss Prevention in the Process Industries, vol. 43, pp 721-729.   http://dx.doi.org/10.1016/j.jlp.2016.06.016

 

39. E. Mechhoud, M. Rouainia, M. Rodriguez (2016). A new tool for risk analysis and assessment in petrochemical plants. Alexandria Engineering Journal,  Vol.55(3)29192931. doi:10.1016/j.aej.2016.05.013g

 

38. M. Rodriguez and I. Diaz (2016). "System theory based hazard analysis applied to the process industry", International Journal of Reliability and Safety, Vol 10, No 1, pp 72-86. 

 

37. Carlos Hernández, Manuel Rodríguez, Ismael Díaz and Ricardo Sanz. (2016). "Model Based Engineering of Process Plants using SysML". Computer-Aided Chemical Engineering, Volume 38, Pages: 1281-1286, Elsevier. ISBN: 978-0-444-63873-1 (26th EUROPEAN SYMPOSIUM ON COMPUTER AIDED PROCESS ENGINEERING, ESCAPE 26) http://dx.doi.org/10.1016/B978-0-444-63428-3.50218-6 

 

36. Manuel Rodríguez, Ismael Díaz. (2016). "Ionic Liquids Role for  Multifeedstock / Multiproduct Integrated Biorefineries". Computer-Aided Chemical Engineering, Volume 38, Pages: 1219-1224, Elsevier. ISBN: 978-0-444-63873-1 (26th EUROPEAN SYMPOSIUM ON COMPUTER AIDED PROCESS ENGINEERING, ESCAPE 26) http://dx.doi.org/10.1016/B978-0-444-63428-3.50208-3 

 

35.  K. R. Thórisson, Nivel, E., B. R. Steunebrink., H. P. Helgason, G. Pezzulo, R. Sanz, J. Schmidhuber, H. Dindo, M. Rodriguez, A. Chella, G.K. Jonsson, D. Ognibene, C. Hernandez (2014). "Autonomous Acquisition of Natural Situated Communication".  IADIS International Journal on Computer Science and Information Systems, vol. 9, num. 2, pp 115-131

 34. Araceli Hernández, Isabel Ortiz, Antonio Carretero, Ma del mar de la Fuente , Julio Lumbreras, Ma Luisa Martínez, Vicente Riveira and Manuel Rodríguez (2014). "Integral Framework to Drive Engineering Education beyond Technical Skills". International Journal of Engineering Education, vol. 30(B), num. 6, pp 1697-1707


33. 
Nivel, E., K. R. Thórisson, B. R. Steunebrink.,H. Dindo, G. Pezzulo, M. Rodriguez, C. Hernandez, D. Ognibene, J. Schmidhuber, R. Sanz, H. P. Helgason & A. Chella (2014). "Bounded Seed-AGI". Lecture Notes in Computer Science (LNAI series), vol 8598, Pages: 85-96, Springer 978-3-319-09273-7 (AGI Conference Quebec, Canada)

 

32. Manuel Rodríguez, Ismael Díaz. (2014). "A New Functional Systems Theory Based Methodology for Process Hazards Analysis". Computer-Aided Chemical Engineering, Volume 33, Pages: 703-708, Elsevier. ISBN: 978-0-444-63456-6 (24th EUROPEAN SYMPOSIUM ON COMPUTER AIDED PROCESS ENGINEERING, ESCAPE 24)

 

31. Ismael Díaz, Manuel Rodríguez. (2014) "On-line Fault Diagnosis by combining Functional and Dynamic Modelling of Chemical Plants".Computer-Aided Chemical Engineering, Volume 33, Pages: 679-684, Elsevier. ISBN: 978-0-444-63456-6 (24th EUROPEAN SYMPOSIUM ON COMPUTER AIDED PROCESS ENGINEERING, ESCAPE 24)  


30. De María, R., Díaz I., Rodríguez M. and Saiz A. (2013). "Industrial Methanol from Syngas: Kinetic Study and Process Simulation". International Journal of Chemical Reactor Engineering. Volume 11, Issue 1, Pages 1-9, ISSN (Online) 1542-6580, ISSN (Print) 2194-5748, DOI: 10.1515/ijcre-2013-0061.

 

29. Bermejo-Alonso, J., Sanz, R., Rodríguez, M., and Hernaández, C. (2013). "Ontology engineering for the autonomous systems domain". In Fred, A., Dietz, J. G., Liu, K., and Filipe, J., editors, Knowledge Discovery, Knowledge Engineering and Knowledge Management, volume 348 of Communications in Computer and Information Science, pages 263–277. Springer Berlin Heidelberg. DOI 10.1007/978-3-642-37186-8, ISBN: 978-3-642-37185-1

 

28. Ismael Díaz, Manuel Rodríguez, Carlos Arnaiz, Guillermo San Miguel, Mari Paz Domínguez. (2013)."Biomass Pyrolysis kinetics through thermogravimetric analysis".Computer-Aided Chemical Engineering, Volume 32, Pages: 1-6, Elsevier. ISBN: 978-0-444-59520-1 (23rd EUROPEAN SYMPOSIUM ON COMPUTER AIDED PROCESS ENGINEERING, ESCAPE 23) 

 

27. Manuel Rodríguez, José Luis de la Mata, Ismael Díaz (2013). "Fault-Tolerant Self-Reconfigurable Control System". Computer-Aided Chemical Engineering, Volume 32, Pages: 901-906, Elsevier. ISBN: 978-0-444-59520-1 (23rd EUROPEAN SYMPOSIUM ON COMPUTER AIDED PROCESS ENGINEERING, ESCAPE 23) 

 

26. Manuel Rodriguez, J.L. De la Mata (2012). “Automating HAZOP studies using D-higraphs”. Computers and Chemical Engineering, Volume 45, Pages: 102-113, Elsevier. ISSN: 0098-1354

 

25. Manuel Rodriguez, Jose A. Chinea-Herranz (2012). “Decentralized control and identified model  predictive control of divided wall columns”. Journal of Process Control, Volume 22, Pages: 1582-1592, Elsevier. ISSN: 0959-1524

 

24. Manuel Rodriguez, J.L. De la Mata, M.E. Alvarez (2012). “Information Integration: from P&I diagrams to functional models”. Computer-Aided Chemical Engineering, Volume 31, Pages: 535-539, Elsevier. ISSN:1570-7946  (11th International Symposium on Process Systems Engineering. PSE 2012)

 

23. Jose A. Chinea-Herranz, Manuel Rodriguez (2012). “Control of integrated unit operations”. Computer-Aided Chemical Engineering, Volume 31, Pages: 325-329, Elsevier. ISSN:1570-7946 7946  (11th International Symposium on Process Systems Engineering. PSE 2012)

 

22. J.L. de la Mata, Manuel Rodriguez (2012). “Functional modeling applied to HAZOP automation”. Computer-Aided Chemical Engineering, Volume 31, Pages: 255-260, Elsevier. ISSN:1570-7946 7946  (11th International Symposium on Process Systems Engineering. PSE 2012)

 

21. Manuel Rodriguez, J. Bermejo-Alonso, C. Hernandez Corbato, R. Sanz (2012). “Ontology driven description and engineering of autonomous systems: application to process system engineering”. Computer-Aided Chemical Engineering, Volume 30, Pages: 717-722, Elsevier. ISBN: 978-0-444-59520-1 (22nd EUROPEAN SYMPOSIUM ON COMPUTER AIDED PROCESS ENGINEERING, ESCAPE 22) 

 

20. Manuel Rodriguez, J.L. De la Mata, M.E. Alvarez (2012). “Information Integration: Generating functional models from structural ones”. Computer-Aided Chemical Engineering, Volume 30, Pages: 1138-1143, Elsevier. ISBN: 978-0-444-59520-1 (22nd EUROPEAN SYMPOSIUM ON COMPUTER AIDED PROCESS ENGINEERING, ESCAPE 22)

 

19. Manuel Rodriguez, J.L. De la Mata (2012). “HAZOP studies using a functional modeling framework”. Computer-Aided Chemical Engineering, Volume 30, Pages: 1038-1043, Elsevier. ISBN: 978-0-444-59520-1 (22nd EUROPEAN SYMPOSIUM ON COMPUTER AIDED PROCESS ENGINEERING, ESCAPE 22)

 

18. J.L. De la Mata, Manuel Rodriguez (2011). “Self learning of fault diagnosis identification”. Computer-Aided Chemical Engineering, Volume 29, Pages: 1138-1143, Elsevier. ISSN: 15707946 (21stnd EUROPEAN SYMPOSIUM ON COMPUTER AIDED PROCESS ENGINEERING, ESCAPE 21)

 

17. Jose Luis de la Mata, Manuel Rodriguez (2010). “Accident prevention by control system reconfiguration”. Computers and Chemical Engineering, Volume 34, Pages: 846-855, Elsevier. ISSN: 0098-1354 10.1016/j.compchemeng.2010.01.015

 

16. Bermejo-Alonso Julita; Sanz Ricardo; Rodriguez Manuel, Hernandez Carlos (2010). “An Ontology-Based Approach for Autonomous Systems' Description and Engineering The OASys Framework”. Lecture Notes in Artificial Intelligence, Volume 6276, Pages: 522-531, Springer-Verlag

 

15. Bermejo-Alonso Julita; Sanz Ricardo; Rodriguez Manuel, Hernandez Carlos (2010). “An Ontological Framework for Autonomous Systems Modelling”. International Journal on Advances on Intelligent Systems, Volume 3, Pages: 211-225.

 

14. Manuel Rodriguez, J.L. De la Mata (2010). “Abnormal Situation Diagnosis using D-higraphs”. Computer-Aided Chemical Engineering, Volume 28, Pages: 1679-1685, Elsevier. ISSN: 15707946 (20th EUROPEAN SYMPOSIUM ON COMPUTER AIDED PROCESS ENGINEERING, ESCAPE 20)

 

13. Manuel Rodriguez, J.L. De la Mata (2010). “First-principles models for sensor validation through distributed simulation”. Computer-Aided Chemical Engineering, Volume 28, Pages: 1477-1482, Elsevier. ISSN: 15707946 (20th EUROPEAN SYMPOSIUM ON COMPUTER AIDED PROCESS ENGINEERING, ESCAPE 20)

 

12. R. Sanz, C. Hernández, J. Gómez, J. Bermejo-Alonso, M. Rodriguez, A. Hernando, G. Sánchez (2009). “Systems, Models and Self-Awareness: Towards Architectural Models of Consciousness", International Journal of Machine Consciousness12: 255-279. ISSN: 1793-8430

 

11. Manuel Rodriguez, J.L. De la Mata (2009). “A comparison of functional modeling techniques for autonomous system development”. Computer-Aided Chemical Engineering, Volume 27, Pages: 567-572, Elsevier. ISBN: 978-0-444-53472-9 DOI:10.1016/S1570-7946(09)70315-3(10th International Symposium on Process Systems Engineering. PSE 2009)

 

10. J.L. De la Mata, Manuel Rodriguez (2009). “Accident prevention by control system reconfiguration”. Computer-Aided Chemical Engineering, Volume 26, Pages: 1117-1123, Elsevier. ISSN: 15707946 (19th EUROPEAN SYMPOSIUM ON COMPUTER AIDED PROCESS ENGINEERING, ESCAPE 19)

 

9. Manuel Rodriguez, Ricardo Sanz (2009). “Modeling using higraphs: an integrating approach”. Computer-Aided Chemical Engineering, Volume 26, Pages: 871-876, Elsevier. ISSN: 15707946 DOI: 10.1016/S1570-7946(09)70145-2, (19th EUROPEAN SYMPOSIUM ON COMPUTER AIDED PROCESS ENGINEERING, ESCAPE 19)

 

8. Manuel Rodriguez, Ricardo Sanz (2008). “RCS for process control: Is there anything new under the sun?”. Computer-Aided Chemical Engineering, Volume 25, Pages: 513-518, Elsevier. ISSN: 15707946 DOI:10.1016/S1570-7946(08)80090-9 (18th EUROPEAN SYMPOSIUM ON COMPUTER AIDED PROCESS ENGINEERING, ESCAPE 18)

 

7. Ricardo Sanz, Ignacio López, Manuel Rodriguez, Carlos Hernández (2007) “Principles for consciousness in integrated cognitive control”. Neural Networks journal, Volume 20, Pages 938-946, Elsevier, ISSN: 0893-6080. DOI: 10.1016/j.neunet.2007.09.012

 

6. Manuel Rodriguez, J.L. De la Mata (2007). “Functional Modeling for Risk Analysis”. Computer-Aided Chemical Engineering, Volume 24, Pages: 1489-1494, Elsevier. ISSN: 15707946 (17th EUROPEAN SYMPOSIUM ON COMPUTER AIDED PROCESS ENGINEERING, ESCAPE 17)

 

5. Manuel Rodriguez (2007). “Merging functional and conceptual ontologies”. Computer-Aided Chemical Engineering, Volume 24, Pages: 303-308, Elsevier. ISSN: 15707946 (17th EUROPEAN SYMPOSIUM ON COMPUTER AIDED PROCESS ENGINEERING, ESCAPE 17)

 

4. Manuel Rodriguez, J.A. Gayoso (2006). “Degrees of freedom for process control”. Computer-Aided Chemical Engineering, Volume 22, Pages: 1489-1495, Elsevier. ISSN: 15707946 (16th EUROPEAN SYMPOSIUM ON COMPUTER AIDED PROCESS ENGINEERING, ESCAPE 16 and 9th International Symposium on Process Systems Engineering. PSE 2006 )

 

3. Manuel Rodriguez, David Pérez (2005). “First principles model based control”. Computer-Aided Chemical Engineering, Volume 20, Pages: 1285-1290, Elsevier. ISSN: 15707946 (15th EUROPEAN SYMPOSIUM ON COMPUTER AIDED PROCESS ENGINEERING, ESCAPE 15)

 

2. Manuel Rodriguez (2005). “A new algorithm to develop hybrid systems”. Computers and Chemical Engineering, Volume 30, Pages: 260-267, Elsevier. ISSN: 0098-1354 DOI: 10.1016/j.compchemeng.2005.09.003,

 

1. Manuel Rodriguez, Ricardo Sanz (2001), “HOMME: A modeling environment for multiple applications”. International Journal of Modelling and Simulation, Volume 21, Pages 171-177. ISSN: 0228-6203

 

 

PEER REVIEWED CONFERENCES AND OTHER JOURNALS

 

 48. Xi Chen, Jian Jiao and Manuel Rodríguez (2017). "The failure propagation analysis of flight control system based on D-higraph". 2nd Internation Conference on Reliabiity Systems Engineering (ICRSE 2017), July 10-12, Beijing, China.

 

47.  Ismael Díaz, Ramón Mur and Manuel Rodríguez (2017). "Optimization of an extractive distillation column for the separation of aromatic-aliphatic mixtures using surrogate models." 11th European Congress on Chemical Engineering, ECCE 11, October 1-5, Barcelona, Spain.



46. Emilio J. González, Ismael Díaz, Manuel Rodríguez (2017). "The Cubic Plus Association Equation of State as a Tool to Describe the Phase Behaviour of Systems Containing Ionic Liquids." 
11th European Congress on Chemical Engineering, ECCE 11, October 1-5, Barcelona, Spain.

 

45. Emilio J. González, Ismael Díaz, Manuel Rodrígez, Begoña González and Ángeles Domínguez.  Equations of state as potential tools to describe the physical and thermodynamic properties of ionic liquids. 5th Iberoamerican Meeting on Ionic Liquids (IMIL 2017), Santos, Brazil, April 5-7th 2017

 

44. Emilio J. González, Manuel Rodrígez, Ismael Díaz, Sabela Abad, Irene Domínguez, Begoña González and Ángeles Domínguez. Estimation of the Hildebrand solubility parameters of ionic liquids using the approach of intrinsic viscosity.  5th Iberoamerican Meeting on Ionic Liquids (IMIL 2017), Santos, Brazil, April 5-7th 2017

 

43. El-Arkam Mechhoud, Mounira Rouainia, Manuel Rodríguez. Functional Modeling of a HDPE reactor using digraphs for process hazard analysis. 8th International Conference on Modelling, Identification and Control (ICMIC'16) DOI: 10.1109/ICMIC.2016.7804209 

 

42. P. Bouza, I. Diaz, J. Palomar, M. Rodriguez and T. Haug-Warberg. Prediction of CO2 Solubility in Ionic Liquids Using Artificial Neural Networks and COSMO σ-Moments AIChE Annual Meeting, Noviembre 2016, San Francisco (EEUU)

 

41. I. Diaz, M. Rodriguez. Application of Low-Cost components to the Chemical Engineering Practices. AIChE Annual Meeting, Noviembre 2016, San Francisco (EEUU)

 

40. M. Rodriguez, I. Diaz, C. Hernández, R. Sanz, J. Bermejo. Process Systems Lifecycle Management Using a Model Based Engineering Approach. AIChE Annual Meeting, Noviembre 2016, San Francisco (EEUU)

 

39. M. Rodriguez, I. Díaz. Integrated Biorefineries Using Ionic Liquids: Application to Macroalgae Feedstock . AIChE Annual Meeting, Noviembre 2016, San Francisco (EEUU)

 

38. I. Diaz, M. Rodriguez, J. Palomar. Ionic Liquids As Entrainers for the Separation of Aliphatic/Aromatic Mixtures By Extractive Distillation Systems: Rigorous Model Based Process Optimization. AIChE Annual Meeting, Noviembre 2016, San Francisco (EEUU)

 

37.  I. Díaz, C. Juarez, J. Ramirez, M. Rodriguez, S. León, A. Santos. "Metodología de aula inversa en los laboratorios de ingeniería química: diseño de prácticas de laboratorio con componentes de bajo coste." III Congreso de Innovación Docente en Ingeniería Química (CIDIQ), 21-23 Enero 2016, Alicante.

 

36. M. Rodríguez, I. Díaz, P. Z. Li (2015) "A Control Strategy for Extractive and Reactive Divided Wall Columns". 10th European Congress on Chemical Engineering, ECCE 10, September 27 - October 1st, Nice, France. 

 

35. M. Rodríguez, I. Díaz (2015) "STPA: A Systemic and Integral Hazards Analysis Technique Applied to the Process Industry". 10th European Congress on Chemical Engineering, ECCE 10, September 27 - October 1st, Nice, France. 

 

34. I. Díaz, M. Rodríguez, G. Iniesto, V. Ferro, J. Palomar (2015) "Purification of Hydrocarbon Streams by Liquid-liquid Extraction with Ionic Liquids". 10th European Congress on Chemical Engineering, ECCE 10, September 27 - October 1st, Nice, France. 

 

33. I. Díaz, M. Rodríguez, M. Mestanza, R. Pollan, A. Rodríguez (2015) "New Opportunities for Solar Grade Silicon Processing Simulation". 10th European Congress on Chemical Engineering, ECCE 10, September 27 - October 1st, Nice, France. 

 

32. I. Díaz, M. Rodríguez, J. Palomar, V. Ferro (2015) "Ionic Liquids as Entrainers for Azeotropic Disitillation Systems". 10th European Congress on Chemical Engineering, ECCE 10, September 27 - October 1st, Nice, France.

 

31. M. Rodríguez, I. Díaz (2015) "Enhancing Integrated Biorefineries Performance Using Ionic Liquids ". Iberoamerican Meeting on Ionic Liquids, IMIL 2015, July 2-3, Madrid, Spain

 

30. I. Díaz, M. Rodríguez, G. Iniesto, V. Ferro, J. Palomar (2015) "Desulfurization of hydrocarbon streams: from COSMO ionic liquid selection to process simulation". Iberoamerican Meeting on Ionic Liquids, IMIL 2015, July 2-3, Madrid, Spain

 

29. I. Díaz, M. Rodríguez, V. Ferro, J. de Riva (2015) "Fluid phase equilibria predictions and simulation of hydrocarbon desulfurization process with ionic liquids ". 6th International Congress on Ionic Liquids, COIL-6, June 16-20, Jeju, Korea 

 

28. A. Yousefi, M. Rodriguez, J. Martín Juez (2015) "How Close is My Operation to a Major Accident?".  11th Global Congress on Process Safety, AIChE 2015 Spring Meeting, April 27-29, Austin, Texas(USA).

 

27. M. Rodriguez, I. Díaz, P. Zhou Li (2015). “A Control Strategy for Reactive and Extractive Dividing-wall Columns”. European Sympsium on Computer Aided Process Engineering (ESCAPE 25), June 1-4, Copenhague, Denmark

 

26. R. Sanz, C. Hernandez, M. Rodriguez, J. Bermejo, and I. Lopez. (2014) “Improving resilience of controllers using cognitive design patterns”.  IFAC World Congress, Cape Town, South Africa, August 2014, pp. 683-688.

 

25. E. Nivel, K. Thorisson, B. Steunebrink, H. Dindo, G. Pezzulo, M. Rodriguez, C. Hernandez, D. Ognibene, J, Schmidhuber, R. Sanz, H. Helgason, A. Chella and G. Jonson. (2014) "Autonomous Acquisition of Natural Language." Proceedings of IADIS International Conference on Intelligent Systems & Agents, 58-66. Lisbon, Portugal, July 2014. Best paper award.

 

24. M. Rodríguez, I. Díaz (2014). "Risk Management in the Process Industry." 2014 STAMP/STPA Conference. MIT, Massachusetts, EEUU.

 

23. Manuel Rodríguez (2012). "Seguridad de Procesos: ¿Podemos sentirnos seguros?. El modelado funcional en la seguridad de proceso". Plenaria. II Congreso Nacional de Química del Petróleo. Barquisimeto, Venezuela.

 

22. Manuel Rodriguez, José Luis de la Mata (2012). “HAZOP studies using a functional modeling framework”. Foundations of Computer Aided Process Operations Conference (FOCAPO 2012), Savannah (USA).

 

21. Julita Bermejo-Alonso, Ricardo Sanz, Manuel Rodríguez and Carlos Hernandez (2011). “Engineering an ontology for autonomous systems: the Oasys Ontology”. International Conference on Knowledge Engineering and Ontology Development (KEOD 2011), Paris.

 

20. Julita Bermejo-Alonso, Ricardo Sanz, Manuel Rodríguez and Carlos Hernandez (2010). “Ontology based engineering of autonomous systems”. International Conference on Autonomous and Autonomic Systems (ICAS 2010), Cancún. Best Paper Award.

 

19. Ricardo Sanz, Carlos Hernandez  and Manuel Rodríguez (2010). “The Epistemic Control Loop”. International Conference on Cognitive Systems (CogSys 2010), Zurich.

 

18. Ricardo Sanz, Carlos Martínez, Manuel Rodríguez and Adolfo Hernando (2008). “Embedded Component Technology for Complex Control Systems”. 17th IFAC World Congress, Seúl.

 

17. Ricardo Sanz, Carlos Martínez,  David Pérez and Manuel Rodríguez (2007). “Using OMG Standardised Technology for Real-Time Embedded Control Components”. European Control Conference (ECC’07), Kos (Grecia).

 

16. Manuel Rodríguez, Elena Jiménez (2006). “Web based Process Control Learning”. Advanced on Control Education Conference (ACE’06), Madrid.

 

15. Santos Galán, Manuel Rodríguez, Ricardo Sanz, Carlos García, Rafael Chinchilla and Adolfo Yela (2005). “The use of CORBA in Process Control”. 16th IFAC World Congress, Praga.

 

14. Ricardo Sanz, Rafael Chinchilla, Manuel Rodriguez, David Perez and Carlos Martinez (2005). “PCT: A Component-based Process Control Testbed”. European Control Conference (ECC’05) and 44th IEEE Conference on Decision and Control (CDC), Sevilla.

 

13. Manuel Rodríguez, José Ángel Gayoso (2005), “Metodología para la evaluación de estrategias de control. Aplicación a operaciones de absorción. Parte II”. Revista Ingeniería Química, Volume 421, Pages 138-146, Febrero 2005.

 

12. Manuel Rodriguez, Ricardo Sanz, Santos Galán (2004). “Hard Real-Time CORBA for process control systems”. European Sympsium on Computer Aided Process Engineering (ESCAPE 14), Lisboa 

 

11. Manuel Rodriguez, Ricardo Sanz, Santos Galán (2004). “Hard Real-Time CORBA for process control systems”. Sympsoium on Advanced Control on Chemical Systems (ADCHEM 03), Hong Kong

 

10. Manuel Rodríguez, José Ángel Gayoso (2004), “Metodología para la evaluación de estrategias de control. Aplicación a operaciones de absorción. Parte I”. Revista Ingeniería Química, Agosto 2004.

 

9. Ricardo Sanz, Santos Galán, Manuel Rodríguez, Carlos García, Rafael Chinchilla and Adolfo Yela (2003). “ An Experiment in Distributed Objects for Real-Time Process Control”. IEEE Conference on emerging technologies and Factory automation (ETFA 03), Lisboa

 

8. Manuel Rodríguez, José Ángel Gayoso (2002), “Integración total de planta”. Revista Ingeniería Química, Volume 392, Pages 77-83, Agosto 2002.

 

7. Manuel Rodríguez, Arancha Marcos (2002). “Plantwide Control design using an expert system”. 15th IFAC World Congress, Barcelona.

 

6. Manuel Rodríguez, José Ángel Gayoso, José Luis Abanades (2001), “Aplicación de la simulación rigurosa a tareas de control predictivo”. Revista Ingeniería Química, Volume 381, Pages 117-123, Agosto 2001.

 

5. Manuel Rodríguez, Ricardo Sanz (1999). “A Modeling Environmet to Handle Complexity”. International Conference on Modeling and Simulation (IASTED MS’99), Filadelfia.

 

4. Alexander Koulouris, Manuel Rodríguez, Jerry Bieszczad, George Stephanopoulos (1999). “Representing non-conservation entities in a phenomena-based modeling environment”. AIChE International Conference, Dallas

 

3. Manuel Rodríguez, José Luis Ruibio and Agustín Jiménez (1997). “Naphta Cut Point Inference Using Neural Networks”. International Conference on Engineering Applications of Neural Networks, Estocolmo.

 

2. Raquel De María, Manuel Rodríguez and Francisco Quintana (1996). “Static and dynamic models of a continuous two phase hydrolisis reactor”. 7 Congreso Mediterráneo de Ingeniería Química, Barcelona.

 

1. Raquel De María, Manuel Rodríguez, Adolfo Narros and Francisco Quintana (1996). “Pilot Plant application of Artificial Intelligent Technologies”. 7 Congreso Mediterráneo de Ingeniería Química, Barcelona.